Eumer plastic tubing (Coloured & Clear)
Coloured or Clear plastic tubing designed to fit together 9 x 10cm lengths
X Small 1.45mm fits into the Medium 2.47mm
Small 1.93mm fits into the Large...
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
Eumer Tungsten Tube Fly Coneheads
Tungsten Tube Fly Coneheads are drilled to fit Eumer plastic tubing, either clear or coloured.
Medium fits on to X Small and Large fits on to small
Packs of 10
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
Eumer Tungsten Tube Fly Coneheads
Tungsten Tube Fly Coneheads are drilled to fit Eumer plastic tubing, either clear or coloured.
Medium fits on to X Small and Large fits on to small
Packs of 10
Eumer Tungsten Tube Fly Coneheads
Tungsten Tube Fly Coneheads are drilled to fit Eumer plastic tubing, either clear or coloured.
Medium fits on to X Small and Large fits on to small
Packs of 10
Hook holder junction tubing. Use to keep hook and fly together while casting and in the water. Large fits 1/8” OD tubes; Small fits 3/32” OD tubes. X-Large fits the XL Rigid tubes only. Clear,...
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
From HMH of Maine, USA comes their RIGID CLEAR PLASTIC TUBING.
Each tube is 5 inches in length, enabling you to create flies up to a full 5 ” – simply cut to your desired length, then finish the...
Eumer Tungsten Tube Fly Coneheads
Tungsten Tube Fly Coneheads are drilled to fit Eumer plastic tubing, either clear or coloured.
Medium fits on to X Small and Large fits on to small
Packs of 10
Eumer plastic tubing (Coloured & Clear)
Coloured or Clear plastic tubing designed to fit together 9 x 10cm lengths
X Small 1.45mm fits into the Medium 2.47mm
Small 1.93mm fits into the Large...
BRASS SHRIMP (CRAYFISH) TUBE BODIES – MICRO
These are the perfect shape for making Crayfish and fish Tube flies. With internal liner and hook hold tubing.
These Micro tubes have a 3 mm bore and are...
